2-1. INTRODUCTION
2-2. MAINTENANCE
HINTS
305
SECTION 2. MAINTENANCE
This section provides procedures for the checkout and
replacement of the various parts used within the fryer.
Before replacing any parts, refer to Section 1, Troubleshooting.
It will aid you in determining the cause of the malfunction.
1. You may use two test instruments to check the electric
components.
• A continuity light
• An ohmmeter
2. When the manual refers to the circuit being closed,
the continuity light will be illuminated or the
ohmmeter should read zero unless otherwise noted.
3. When the manual refers to the circuit being open,
the continuity light will not illuminate or the
ohmmeter will read 1 (one).
A continuity tester cannot be used to check coils or motors.
Model 500/600
2-1