Table of Contents
Advertisement
The <year>, <month>, and <day> parameters must all be supplied. The <year> param-
eter is a four-digit number (2000 to 2099). The <month> parameter is a one or two-
digit number (1 to 12). The <day> parameter is a one or two-digit number (1 to 31).
Specifying the MIN, MAX or DEF parameter sets the system date to the minimum,
maximum, or default value respectively.
7.4.10.7
SYSTem:TIME?
Returns the current system time.
SYST:TIME?
11,43,23
The response is returned in the format, <hour>,<minute>,<second>.
Note: The system time is always returned using 24-hour format regardless of the cur-
rent time format setting.
7.4.10.8
SYSTem:TIME <hour>,<minute>,<second>
Sets the current system time to the specified hour, minute, and second.
SYST:TIME 11,43,23
The <hour>, <minute>, and <second> parameters must all be supplied. The <hour>
parameter is a one or two-digit number (0 to 23). The <minute> parameter is a one or
two-digit number (0 to 59). The <second> parameter is a one or two-digit number (0
to 59).
Note: The system time is always set using 24-hour format regardless of the current
time setting.
7.4.11
Password Commands
The password commands are used for enabling and disabling the password-protected
commands, for querying and setting the probe password-protected state, and for set-
ting a new password.
7.4.11.1
SYSTem:PASSword:CDISable
Disables password protected commands.
SYST:PASS:CDIS
Sending this command prevents the user from accessing the password-protected
settings.
7.4.11.2
SYSTem:PASSword:CENable <pass>
Enables password protected commands.
Digital Communications Interface
Commands
107
Advertisement
Table of Contents
