Table of Contents
Advertisement
1529 Chub-E4 Thermometer Readout
Channel Menu
The DISPLAY FUNCTIONS function of the CHANNEL menu reappears and the
CHANNEL MODE function is available.
Note: Accuracy in the Fast Measurement Mode is affected by ambient conditions,
changes in measured temperature, higher measured temperature, and the time duration
from using the AUTO-CAL function. To reduce the uncertainty in the Fast Measure-
ment Mode, use the 1529 in a controlled ambient environment, in a very stable bath or
dry block at lower temperatures, and use the AUTO-CAL function often.
6.1.2
Enable Channel
The ENABLE CHANNEL function enables and disables measuring of each channel.
If a channel is off, its measurement is not displayed on the top portion of the display in
either scan or simultaneous display modes. When this function is selected, the bottom
portion of the display shows the on/off status of each configured channel and allows
the setting to be changed. Each configured channel is identified by its channel number.
Use the UD buttons to select the channel to change. The LR buttons are used to
change the setting. Press the Enter button to save the setting. Press and hold the Exit
button to cancel to the main display or press the EXIT button to cancel and to move to
the next parameter.
Figure 9
6.1.3
Channel Mode
The CHANNEL MODE (Figure 10 on opposite page)function sets the channel display
mode. When this function is selected, the bottom portion of the display shows the cur-
rent scan mode and allows the setting to be changed.
26
24.159C
1
24.142C
3
CHAN 1:
CHAN 2:
CHAN 3:
CHAN 4:
1529
CHUB E-4 THERMOMETER READOUT
ENTER / MENU
Enable Channel
2
4
ON
ON
ON
ON
UNIT
CONTRAST
24.634C
24.015C
EXIT
Advertisement
Table of Contents
