Table of Contents
Advertisement
1529 Chub-E4 Thermometer Readout
Logging Menu
Figure 40
Press the LR buttons to select the label to edit. By default the labels are set to
DATA_01, DATA_02, ... at the factory. Press the Enter button to begin editing the
label. The word SELECT changes to EDIT, and the label can now be edited. Press the
LR buttons to highlight the character you want to change. Use the UD buttons
to scroll through the letters A-Z, numbers 0-9, and underscore (_). The blank space
causes all characters to the right to be deleted when the Enter button is pressed.
Press the Enter button to store the new label or press the Exit button to cancel and to
return to the menu.
6.4.5
Default Labels
The DEFAULT LABELS function (Figure 41 on opposite page) resets the data labels
to their default settings. By default the labels are set to DATA_01, DATA_02, ... at the
factory. When this function is selected, the bottom portion of the display instructs the
user to press the Enter button to reset the data labels to their default settings.
58
24.159C
1
24.142C
3
SELECT:
DATA_01
1529
CHUB E-4 THERMOMETER READOUT
ENTER / MENU
Data Labels
24.634C
2
24.015C
4
UNIT
CONTRAST
EXIT
Advertisement
Table of Contents
