Table of Contents
Advertisement
1529 Chub-E4 Thermometer Readout
Fields Menu
is editable and indicates the channel ('*', or 1 through 4). If the '*' is selected and you
are in simultaneous mode, channel one is displayed. If you are in scan mode, select-
ing the '*' displays the current channel. The field item is editable and is to the right of
the channel. The table of Field Types above shows the keywords for each type of field
item.
Press the LR buttons to select the display set. Press the Enter button to select the
field parameters (channel and field type) to adjust. Use the LR buttons to adjust
the parameter value. Use the UD buttons to move between parameters. Press the
Exit button to exit to the menu.
6.3.4
Default Fields
The DEFAULT FIELDS function (Figure 23 on this page) clears all display sets and
resets them to the factory defaults. When this function is selected, the bottom portion
of the display instructs you to press Enter to revert to the default display set.
Figure 23
Press the Enter button to revert to the default display setup. Press the Exit button to
exit to the menu
6.3.5
Display Options
The DISPLAY OPTIONS function allows you to select the display resolution, decimal
character, and lamp illumination. When this function is selected, the bottom portion of
the display shows the current display settings. This function is the same as the CHAN-
NEL MODE menu DISPLAY OPTIONS function.
44
24.159C
1
24.142C
3
REVERT TO DEFAULT DISPLAY SETUP.
Press ENTER to continue...:
1529
CHUB E-4 THERMOMETER READOUT
ENTER / MENU
Default Fields
24.634C
2
24.015C
4
EXIT
UNIT
CONTRAST
Advertisement
Table of Contents
