Measurement Commands - Fluke 1529 Technical Manual

1529 Chub-E4 Thermometer Readout
Commands
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
7.4.1

Measurement Commands

The measurement commands are used to read information on the statistical calcula-
tions and for reading the most recent measurement for a specified channel. The mea-
surement commands are not password protected.
7.4.1.1 CALCulate:AVERage:CLEar
Clears the statistical functions for all channels.
CALC:AVER:CLE
The *RST command clears the statistical functions.
76
For query commands, specifying the MIN, MAX, or DEF parameter causes
the instrument to respond with the minimum, maximum, or default setting
respectively.
For set commands, specifying the MIN, MAX, or DEF parameters causes the
instrument to use the minimum, maximum, or default setting respectively.
'|' indicates alternate parameter values.
<chn> indicates a channel number is required.
<dest chn> indicates a destination channel is required.
<n> indicates a number is required.
<num> indicates numeric value is required.
<chn list> indicates a list of channel numbers is required.
<bool> indicates a Boolean value (0 or 1) is required. The mneumonics OFF
and ON are also accepted for 0 and 1, respectively.
<conv> indicates a conversion mnemoic is required.
<param> indicates a parameter name is required.
<seri> indicates a serial number is required.
<res> indicates a resistance value is required.
<volt> indicates a voltage value is required.
<unit> indicates a temperature unit is required.
<pass> indicates a password is required.
<port> indicates a port number is required.
<label> indicates an eight character label is required.
<year> indicates a four digit number is required.
<month> indicates a one or two digit number is required.
<day> indicates a one or two digit number is required.
<hour> indicates a one or two digit number is required.
<minute> indicates a one or two digit number is required.
<second> indicates a one or two digit number is required.
<baud> indicates a valid baud number is required.