Measure Period And Fast Measurement Mode; Figure 8 Measure Perioid - Fluke 1529 Technical Manual

1529 Chub-E4 Thermometer Readout
Channel Menu
Figure 7
6.1.1

Measure Period and Fast Measurement Mode

The MEASURE PERIOD function allows you to control the period (time) between
measurements. You may select between 0.1, 0.2, 0.5, 1, 2, 5, 10 and 30 seconds, 1,
2, 5, 10, and 30 minutes, or 1 hour. Note: Accuracy may be reduced in measurement
periods less than one second. When this function is selected, the bottom portion of the
display shows the current setting and allows the setting to be changed.
Figure 8
The LR buttons are used to select the period between measurements. Press the
Enter button to save the new setting. Press the Exit button to cancel and to exit to the
menu.
24
24.159C
1
24.142C
3
MEASUREMENT CONTROL FUNCTIONS
MEASURE ENABLE
PERIOD CHANNEL
1529
CHUB E-4 THERMOMETER READOUT
ENTER / MENU
Channel Menu
24.159C
1
24.142C
3
MEA PER: 1 SEC
1529
CHUB E-4 THERMOMETER READOUT
ENTER / MENU
Measure Perioid
24.634C
2
24.015C
4
CHANNEL MOVING
MODE AVERAGE
UNIT CONTRAST EXIT
24.634C
2
24.015C
4
UNIT CONTRAST EXIT
DISPLAY
OPTIONS