Omron CJ1W-DRM21 Operation Manual page 9

CS/CJ Series DeviceNet Unit Operation Manual (Cat. No. W380)
Section
Section 1
Features and System Configuration
Section 2
Nomeclature and Installation
Section 3
Allocated CIO and DM Words
Section 4
Remote I/O Master Communications
Section 5
Remote I/O Slave Communications
Section 6
Message Communications
Section 7
Other Functions
Section 8
Communciations Timing
Section 9
Troublueshooting and Maintenance
Appendix
CX-Integrator Ver.2. @ Operation Manual (Cat. No. W464)
Section
Section 1
Overview
Section 2
Basic Operations
Section 3
Trouting Tables
Section 4
Data Links for Controller Link and
SYSMAC LINK
Section 5
Ethernet
Section 6
DeviceNet
Section 7
CompoNet
Section 8
CompoWay/F
Section 9
NT Link
Section 10
Network Testing
Appendices
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
This section provides an overview of the DeviceNet Units and their features. It also
describes the operating procedure and the specifications of the DeviceNet Units.
This section describes the nomenclature, functionality and installation of the
DeviceNet Unit.
This section describes the data exchange between the CPU Unit and DeviceNet Unit
and the definitions of the CIO and DM words allocated to the DeviceNet Unit.
This section describes the remote I/O communications performed as a DeviceNet
master by the DeviceNet Unit.
This section describes the remote I/O communications performed as a DeviceNet
slave by the DeviceNet Unit.
This section describes the message communications of the DeviceNet Unit.
This section describes other functionality provided by the DeviceNet Unit.
This section describes the communications timing of the DeviceNet Unit and the per-
formances of the remote I/O communications and message communications.
This section describes the troubleshooting procedure, event logs and maintenance
procedure for the DeviceNet Unit.
---
This section provides an overview of the CX-Integrator and describes the CX-Integra-
tor menus and connecitions.
This section describes the basic operations used for the CX-Integrator.
This section describes how to set the routing tables. For NJ-series, routing table is
created by using Sysmac Studio instead of CX-Integrator.
This section describes how to set data links for Controller Link and SYSMAC LINK
networks.
This section describes the operations specific to Ethernet.
This section describes the settings and operations unithe to DeviceNet networks
including registeing slaves in the master, I/O allocations, and devide monitoring.
This section describes the basic usage of CompoNet networks and how to set Con-
poNet parameters.
This section describes the settings and operations specific to the CompoWay/F sys-
tem.
This section describes the settings and operations specific to the NT Link system.
This section describes the operations of the network test tool.
This section describes the CPS files for Ethernet, Controller Link, CompoWay/F and
NT Link Networks, and EDS files for DeviceNet Networks.
Manual Configuration
Description
Description
7