Omron CJ1W-DRM21 Operation Manual page 7

DeviceNet Operation Manual (Cat. No. W267)
Section
Section 1
Introduction
Section 2
Network Configuraion and Wiring
Section 3
Communications Power Supply
Methods
Appendices
DRT2 Series DeviceNet Slaves Operation Manual (Cat. No. W404)
Section
Section 1
Smart Slaves and Features
Section 2
Example System Startup
Section 3
Common Slave Specifications
Section 4
Function of All Slaves, General-pur-
pose Slaves, and Environment-
resistive Slaves
Section 5
General-purpose Slaves
Section 6
Environment-resistive Slaves
Section 7
Analog Slaves
Section 8
Communications Timing
Section 9
Troubleshooting and Maintenance
Appendix
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
This section provides an overview of the DeviceNet network, including features, func-
tionality, and types of connected devices such as Masters and Slaves.
This section describes the DeviceNet network configuration, the wiring method, and
details on the connected devices such as connectors.
This section describes the communications power supply methos.
This section provides a list of related products, describes dimensions of the con-
nected devices, and gives a list of corrent consumption of Masters and Slaves.
This section provide a functional overview and descrives the types of Slaves.
This section provides the operating procedures for DeviceNet by using examples.
This section provides specifications and indicator displays that are common to all
Slaves. It also describes the allocation of remote I/O memory for Smsty Salves.
This section provides an overview funcionality provided by DRT2 Sries Slaves and
the operating procedure.
This section describes the specificaions and the components, terminal arrangement,
basic procedures for wiring, and settings for General-purpose Slaves.
This section describes the specifications, terminal arrangements, basic procedures
for wiring and settings for Environment-resistive Slaves (conforming to IP67).
This section describes the specifications, terminal arrangements, wiring methods and
settings for Analog Slaves.
This section provides information on the response time and the transmission delay
time when the remote I/O communications or message commucnaitions are perform-
red.
This section describes the troublushooting and mentainance procedures to take cor-
rective actions for errors and conduct a routine inspection.
This section provides an overview of explicit messages, a list of commands, and
informaion on how to use setting files (EDS files) that are required in the multi-vendor
environments. It also gives a list of the device profiles of Slaves and a list of Slaves
and connected devices.
Manual Configuration
Description
Description
5