Omron CJ1W-DRM21 Operation Manual page 184

5 Remote I/O Slave Communications
Specified areas in memory used for CJ-series Unit
User-set block order
Bit 15
First word
specified
to
Bit 15
First word
specified
to
Bit 15
First word
specified
to
You can set the block allocation order and block allocation areas as required. Refer to CX-Integrator
@
Ver.2. OPERATION MANUAL (Cat. No. W464).
Connection Types
You can specify the type of connection if the CX-Integrator is used for settings. The number of applica-
ble allocation areas varies with the type of connection used.
• You can use a maximum of three areas (OUT 1, IN 1, and IN 2) if you specify multiple connec-
tions.
• You can use two allocation areas (OUT 1 and IN 1) if you specify the automatic connection setting
or a single connection.
5-10
0
Slave output
(OUT) area 1
0
Slave input
(IN) area 1
0
Slave input
(IN) area 2
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
Master
OUT area
IN area
IN area