Authentication Event - Cisco catalyst 3750 Command Reference Manual

authentication event

authentication event
Use the authentication event interface configuration command to set the actions for specific
authentication events on the port.
Syntax Description action
alive
authorize
dead
fail
next-method
no-response
reinitialize
retry
retry count
server
vlan
vlan-id
Defaults No event responses are configured on the port.
Command Modes
Interface configuration
Command History Release
12.2(50)SE
Usage Guidelines Use this command with the fail, no-response, or event keywords to configure the switch response for a
specific action.
Catalyst 3750 Switch Command Reference
2-24
authentication event fail {[action [authorize vlan vlan-id | next-method] {| retry {retry
count}]} { no-response action authorize vlan vlan-id} {server {alive action reinitialize} |
{dead action authorize}}
no authentication event fail {[action[authorize vlan vlan-id | next-method] {| retry {retry
count}]} {no-response action authorize vlan vlan-id} {server {alive action reinitialize} |
{dead action authorize}}
Configure the required action for an authentication event.
Configure the authentication, authorization, and accounting (AAA) server
alive actions.
Authorize the port.
Configure the AAA server dead actions.
Configure the failed-authentication parameters.
Move to next authentication method.
Configure the non-responsive host actions.
Reinitialize all authorized clients
Enable retry attempts after a failed authentication.
Number of retry attempts from 0 to 5.
Configure the actions for AAA server events.
Specify the authentication-fail VLAN from 1 to 4094.
VLAN ID number from 1 to 4094.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07