Pair A Tablet; Move Audio From The Tablet To The Phone - Cisco 8811 User Manual

Advanced Calling Features
If your Cisco IP Phone does not support Bluetooth then it also does not support Intelligent Proximity for
Note
Tablets. For example, Cisco IP Phone 8851NR does not support Bluetooth and thus it does not support
Intelligent Proximity for Tablets. For more information, contact your administrator.

Pair a Tablet

You can connect a tablet and a Bluetooth headset at the same time. You cannot connect a tablet and a mobile
phone at the same time.
After you pair your tablet to your Cisco IP Phone, the phone will automatically connect to the tablet when
the tablet is in range, and disconnect from the tablet when the tablet is out of range.
Note When you connect your Bluetooth headset and your tablet at the same time, the Bluetooth headset cannot
be used to answer the audio from the or tablet.
Cisco IP Phone 8851NR does not support Bluetooth
Procedure
Step 1 Put the tablet in discoverable mode.
Note
Step 2
On your Cisco IP Phone, press Applications.
Step 3 Choose Bluetooth > Add Bluetooth device.
Step 4 Select the tablet from the available devices list to pair.
Step 5 Verify the passkey on the tablet and the Cisco IP Phone.

Move Audio from the Tablet to the Phone

Cisco IP Phone 8851NR does not support Bluetooth
Procedure
Step 1 When the soft client call comes to the tablet, set the audio path to use the Bluetooth connection to the phone.
Step 2 Listen to the audio on the phone using the headset, handset, or speakerphone.
REVIEW DRAFT - CISCO CONFIDENTIAL
For more information about discoverable mode, see your tablet documentation.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications Manager
Pair a Tablet
11.0
95