Danfoss VLT AQUA Drive Operating Instructions Manual page 86

8. How to programme the frequency converter
[21] l/min
[22] l/h
[23] m 3 /s
[24] 3
m /min
[25]
m 3 /h
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] °C
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
8
[75] mm Hg
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125] 3
ft /s
[126]
ft 3 /min
[127] ft 3 /h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in 2
[172] in WG
[173] ft WG
[174] in Hg
[180] HP
86
This parameter determines the unit that is used for the setpoint reference and feedback that the PID Controller
will use for controlling the output frequency of the frequency converter.
®
MG.20.M4.02 - VLT is a registered Danfoss trademark
®
VLT AQUA Drive
Operating Instructions