Danfoss VLT AQUA Drive Operating Instructions Manual page 47

®
VLT AQUA Drive
Operating Instructions
Min. Reference
Max. Reference
Initial Ramp Up Time
Final Ramp Down Time
Normal Ramp Up Time
Normal Ramp Down Time
Motor Min. Speed
Motor Max. Speed
Use the "Closed Loop" wizard under "Quick Menu_Funtion_Setup", to easily set up the feedback settings in the PID controller.
Pipe Fill Mode
Pipe Fill Enable
Pipe Fill Rate
Filled Set Point
Par. 3-01
Par. 3-02
Par. 3-84
Par. 3-88
Par. 3-41
Par. 3-42
Par. 4-11
Par. 4-13
Par. 29-00
Par. 29-04
Par. 29-05
®
MG.20.M4.02 - VLT is a registered Danfoss trademark
6. Application Examples
(30 Hz)
(50/60 Hz)
(2 sec.)
(2 sec.)
(8 sec. depending on size)
(8 sec. depending on size)
(30 Hz)
(50/60 Hz)
(Feedback units/sec.)
(Feedback units)
6
47