Download  Print this page

Advertisement

USER GUIDE
LOCATION OF CONTROLS
One-Touch
Memory Key
Handset
Hanger
Hook

Top View

Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation
with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Infrontia Corporation
has no obligation to provide any updates or corrections to this manual. Further, NEC Infrontia Corporation
also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No
representation is made that this manual is complete or accurate in all respects and NEC Infrontia Corporation shall not
be liable for any errors or omission. In no event shall NEC Infrontia Corporation be liable for any incidental or
consequential damages in connection with the use of this manual. This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written
consent of NEC Infrontia Corporation .

Line Interface

Message Waiting
Lamp
VOLUME Control Key
2004 by NEC Infrontia Corporation
DTH-1-1 (BK) TEL

Bottom View

MUTE Key
REDIAL Key
FLASH Key
IN USE Indicator
All Rights Reserved.
Dial Mode Switch
Handset Interface

Advertisement

   Related Manuals for NEC DTH-1-1

   Summary of Contents for NEC DTH-1-1

  • Page 1: Bottom View

    Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Infrontia Corporation has no obligation to provide any updates or corrections to this manual.
  • Page 2: Important Safety Instructions

    USER GUIDE DTH-1-1 (BK) TEL IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons by doing the following: 1. Read and understand all instructions.
  • Page 3: Connection To The Telephone Line

    USER GUIDE DTH-1-1 (BK) TEL CONNECTION TO THE TELEPHONE LINE Connect the line cord to the bottom of the DTH-1-1 (BK) TEL and to PBX/KTS Phone Jack. Note : Use the DTH-1-1(BK)TEL only behind a PBX or a KTS. SPECIFICATIONS...
  • Page 4: Telephone Ringer Set Up

    DTH-1-1 (BK) TEL is connected to a PBX/KTS. FLASH 1. While on a call, press FLASH Key. Note : If the DTH-1-1 (BK) TEL is connected to a PBX/KTS, you can send the "Flash" command by pressing the FLASH Key. If the DTH-1-1 (BK) TEL is connected to the Telephone Network, you can "Disconnect and Recall"...
  • Page 5: Memory

    USER GUIDE DTH-1-1 (BK) TEL MEMORY DTH-1-1 (BK) TEL has 4 One-Touch Speed Dial Memory Keys. Once a number has been stored in a Memory location, you only have to go off-hook and press one button to make the call.
  • Page 6: Last Number Redial

    WALL MOUNTING The DTH-1-1 (BK) TEL is suitable for wall mounting. Check for hidden cables, water pipes, etc. before drilling holes. Before you commence, check that the intended mounting point is within reach of a Telephone Socket.
  • Page 7: Fcc Part 68 Registration

    If trouble is experienced with this equipment, please contact your NEC Dealer for repair and/or warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved.
  • Page 8: Fcc Part

    USER GUIDE DTH-1-1 (BK) TEL FCC Part 15 omplies with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules. INDUSTRY CANADA (CS-03) The Load Number of the equipment: N/A "Notice: The Industry Canada label identifies certified equipment. The certification means that the equipment meets certain telecommunication network protective operational and safety requirements.

Comments to this Manuals

Symbols: 0
Latest comments: