Table of Contents
Advertisement
set port dot1x initialize
Use the set port dot1x initialize command to initialize port dot1x.
Syntax:
The syntax for this command is:
set port dot1x initialize <module/port>
Syntax
<module/port>
Example:
W310-1(super)# set port dot1x initialize 1/3
port 1/2 dot1x was initialized
Avaya W310 Command Reference Guide
Description
1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
•
To specify ports 1 to 5, type 1/1-5
Chapter 11
257
Advertisement
Table of Contents
