Table of Contents
Advertisement
Chapter 8
LAP and Radio Card Commands
automatic-channel-selection-band
User level: privileged, supervisor.
Command Mode: Radio card, Template
Use the automatic-channel-selection-allowed-band command to configure
the frequency bands that the automatic channel selection feature will scan through.
Syntax:
The syntax for this command is:
automatic-channel-selection-band <lower-middle | lower-
middle-high>
Syntax
lower-middle |
lower-middle-high
Message:
After this command is initiated, the LAP must reboot for any change to this setting to take
effect. The following message displays after you initiate this command:
This command will reboot the LAP(s). Do you want to continue (Y/N)?
•
Type Y to reboot the LAP.
•
Type N to cancel the reboot. The change in this setting will not take effect.
Example:
To set the automatic channel selection allowed band:
W310-1(super/LAP lobby/802.11a first-slot)# automatic-
channel-selection-band lower-middle
This command will reboot the LAP(s) - do you want to
continue (Y/N)?
90
Description
The following lists the bands and channels for each selection:
lower-middle - U-NII Lower Band equals 5.15 to 5.25 GHz
(channels 36, 40, 44, 48), and, U-NII Middle Band equals 5.25 to
5.35 GHz (channels 52, 56, 60, 64)
lower-middle-high - U-NII Lower Band equals 5.15 to 5.25
GHz (channels 36, 40, 44, 48), U-NII Middle Band equals 5.25
to 5.35 GHz (channels 52, 56, 60, 64), U-NII High Band equals
5.725 to 5.825 GHz (channels 149, 153, 157, 161)
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
