Ether-Type-Rule - Avaya W310 Command Reference Manual

Example:
W310-1(super/ACL 310/ether type rule 21)# ether-type 50
Done!
W310-1(super/ACL 310/ether type rule 21)#

ether-type-rule

User level: privileged, supervisor.
Command Mode: IP Rule Table
Use the ether-type-rule command to create or enter an ether type rule.
Use the [no] form of this command to delete the rule.
Syntax:
The syntax for this command is:
[no] ether-type-rule {<index> | default}
Syntax
<index>
default
Example:
W310-1(super/ACL 330)# ether-type-rule 21
W310-1(super/ACL 330/ether type rule 21)#
Avaya W310 Command Reference Guide
Description
Number of the rule. The range is from 1 to 9999.
Use the default rule.
Chapter 10 W310 Policy Commands
191