Table of Contents
Advertisement
Chapter 8
LAP and Radio Card Commands
Message:
After this command is initiated, the LAP will need to reboot in order for any change to this
setting to take effect. The following message displays after you initiate this command:
This command will reboot the LAP(s). Do you want to continue (Y/N)?
•
Type Y to reboot the LAP.
•
Type N to cancel the reboot. The change in this setting will not take effect.
Example:
To enable automatic channel selection:
W310-1(super/LAP lobby/802.11a first-slot)# channel-
selection auto
This command will reboot the LAP(s) - do you want to
continue (Y/N)? y
To disable automatic channel selection:
W310-1(super/LAP lobby/802.11a first-slot)# channel-
selection selective
This command will reboot the LAP(s) - do you want to
continue (Y/N)? y
Done!
W310-1(super/LAP lobby/802.11a first-slot)# channel-
frequency 1
This command will reboot the LAP(s) - do you want to
continue (Y/N)? y
clear statistics
User level: privileged, supervisor.
Command Mode: LAP, Radio card
Use the clear statistics command to clear all the Light Access Point (LAP's)
general radio counters/statistics. This includes the following:
• Number of Wired Equivalent Privacy (WEP) errors
• Number of successfully transmitted MAC Protocol Data Units (MPDUs) belonging to
a fragmented MAC Service Data Unit (MSDU)
• Number of MPDUs received that belong to a fragmented MSDU
• Number of successfully transmitted multicast MSDUs
• Number of multicast MSDUs received
• Number of failed transmitted MSDUs because the number of retries reached its limit
98
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
