Table of Contents
Advertisement
Chapter 10
Policy Commands
Syntax
<start port> <end
port>
not
Example:
For UDP source ports:
W310-1(super/ACL 330/ip rule 21)# udp source-port eq ftp
Done!
W310-1(super/ACL 330/ip rule 21)#
Setting Policy: Example 1
This example shows how to configure a policy to provide exclusive access of a "marketing"
server to the marketing user group and an "engineering" server to the engineering user
group.
Network Setup:
The following equipment is used.
•
W310 with an IP address 192.168.0.5
•
Two servers named - Marketing server (192.168.0.15) and Engineering server
(192.168.0.20)
•
RADIUS server (optional)
232
Description
Start port and end port range for which you want to apply the
rule. The range is a value from 0 to 65535.
•
Default for start port is 0.
•
Default for end port is 65535.
Source UDP port to which this rule is not applied. The rule is
applied to all source UDP ports except for those that you specify
with not keyword.
Avaya W310 Command Reference Guide
3 of 3
Advertisement
Table of Contents
