Table of Contents
Advertisement
Chapter 18
User, User Group, and RADIUS Commands
show users profile
User level: supervisor
Use the show users profile command to show a users list and the following user
attributes:
• user group name,
• username,
• MAC address,
• ip address,
• policy user group name,
• allowed Access Points (APs),
• current AP group associated to,
• home gateway IP address,
• dynamic or static home gateway,
• vlan,
• EAP type,
• master session key lifetime
• physical port
This command is filtered by either the MAC or IP address with mask.
Syntax:
The syntax for this command is:
show users profile [ip <ip-address> | mac <mac>] [wildcard
<wildcard>] [user <all-users | home-gateways-users | foreign-
gateway-users>] [lap <lap-name>] [vlan <vlan>]
Syntax
<ip-address>
<mac>
<wildcard>
408
Description
Filter by the IP address.
Filter by the MAC address with mask.
The range of IP addresses of the rule.
The zero bits in the wildcard correspond to bits in the IP address
that remain fixed. The one bits in the wildcard correspond to bits
in the IP address that can vary. Note that this is the opposite of
how bits are used in a netmask.
Avaya W310 Command Reference Guide
1 of 2
Advertisement
Table of Contents
