Chapter 8
LAP and Radio Card Commands
Example:
W310-1(super)# reboot-lap all
This command will reboot the LAP(s) - do you want to
continue (Y/N)? y
Reboot LAP connected to port 1
Reboot LAP connected to port 2
LAP isn't connected to port 3
LAP isn't connected to port 4
Reboot LAP connected to port 5
Reboot LAP connected to port 6
LAP isn't connected to port 7
LAP isn't connected to port 8
....
restore-lap-to-template
User level: privileged, supervisor.
Command Mode: Root, LAP
Use the restore-lap-to-template command to restore the LAP or LAPs to the
default template attributes. You can restore all the LAPs in your domain or restore only the
LAP for the LAP mode you are in.
Warning: You will lose the configuration information currently stored on the LAP(s) if you
Syntax:
The syntax for this command is:
restore-lap-to-template <all>
Syntax
all
122
use this command.
Description
Restores all the Light Access Points in your domain to the
default template attributes.
Avaya W310 Command Reference Guide