Table of Contents
Advertisement
Chapter 11
W310 Port Commands
set port dot1x server-timeout
User level: supervisor
Use the set port dot1x server-timeout command to set the time to wait for a
reply from the Authentication Server before the session is terminated.
Syntax:
The syntax for this command is:
set port dot1x server-timeout <module/port> <seconds>
Syntax
<module/port>
seconds
Example:
W310-1(super)# set port dot1x server timeout 1/2 400
264
Description
1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
•
To specify ports 1 to 5, type 1/1-5
Timeout in seconds. The valid range is 0 to 65535.
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
