Table of Contents
Advertisement
Chapter 3
Configuration File Commands
copy stack-config tftp
User level: privileged, supervisor.
Use the copy stack-config tftp command to upload the stack-level parameters
from the current NVRAM running configuration to a TFTP server.
! Create the file into which you wish to upload the stack-level parameters prior to
executing this command.
Syntax:
The syntax for this command is:
copy stack-config tftp <filename> <ip>
Syntax
<filename>
<ip>
Example:
W310-1# copy stack-config tftp c:\conf.cfg 192.168.49.10
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'upload status' command
********************************************************************
* If you are currently running the W310 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************
18
Description
The destination file name (full path)
The IP address of the TFTP server
Avaya W310 Command Reference Guide
*
Advertisement
Table of Contents
