Keypad And Display - Emerson unidrive m200 User Manual

Safety Product Mechanical
information information installation
Figure 2-3 Features of the drive (size 5 to 6)
2
1
3
4
5
3
Key
1. Keypad
2. Rating label
3. Option module slot 1
4. Relay connections
5. Control connections
2.5

Keypad and display

The keypad and display provide information to the user regarding the operating status of the drive and trip codes, and provide the means for changing
parameters, stopping and starting the drive, and the ability to perform a drive reset.
Figure 2-4 Unidrive M200 keypad detail
6
5
4
(1) The Enter button is used to enter parameter view or edit mode, or to accept a parameter edit.
(2 / 5) The Navigation buttons can be used to select individual parameters or to edit parameter values.
(3) The Stop / Reset button is used to stop and reset the drive in keypad mode. It can also be used to reset the drive in terminal mode.
(4) The Start button is used to start the drive in keypad mode.
(6) The Escape button is used to exit from the parameter edit / view mode.
(7) The Speed Reference Potentiometer is used to control the speed reference in keypad mode (only available on Unidrive M201).
Unidrive M200 / M201 User Guide
Issue Number: 4
Electrical Getting Basic
installation started parameters
7 8 6
5
11
10
9
6. Braking terminal
7. DC bus +
8. DC bus -
9. Motor connections
10. AC supply connections
V A Hz rpm %
1
2
3
Running the NV Media
Optimization
motor Card
2
6
11. Ground connections
Figure 2-5 Unidrive M201 keypad detail
9
10
11
Advanced
Technical data Diagnostics
parameters
8 7 6
10 11 9
8
V A Hz rpm %
1
7
UL Listing
2
15