Emerson unidrive m200 User Manual page 44

Safety Product Mechanical
information information installation
3.12.1 Fan removal procedure
Figure 3-38 Removal of size 5 heatsink fan
1
A: Press the tabs (1) inwards to release the fan assembly from the underside of the drive.
B: Use the tabs (1) to withdraw the fan by pulling it away from the drive.
C: Depress and hold the locking release on the fan cable lead as shown (2).
D: With the locking release depressed (2), take hold of the fan supply cable and carefully pull to separate the connectors.
Figure 3-39 Removal of the size 6 heatsink fan
A: Press the tabs (1) inwards to release the fan assembly from the underside of the drive.
B: Use the tabs (1) to withdraw the fan by pulling it away from the drive.
C: Depress and hold the locking release on the fan cable lead as shown (2).
D: With the locking release depressed (2), take hold of the fan supply cable and carefully pull to separate the connectors.
44
Electrical Getting Basic
installation started parameters
1
2
Running the NV Media
Optimization
motor Card
Advanced
Technical data Diagnostics
parameters
Unidrive M200 / M201 User Guide
Issue Number: 4
UL Listing