Tools Needed For Installation - Oracle SPARC T7-4 Installation Manual

Tools Needed for Installation

Caution -
disable the server or require repair by service technicians, place components on an antistatic
surface, such as an antistatic discharge mat, an antistatic bag, or a disposable antistatic mat.
Wear an antistatic grounding strap connected to a metal surface on the chassis when you work
on server components.
Related Information
"Handling Precautions" on page 25
■
"Tools Needed for Installation" on page 26
■
"Rack Cautions" on page 30
■
Tools Needed for Installation
Torx T30 screwdriver
■
Long No. 2 Phillips screwdriver
■
Cutters or heavy duty scissors
■
Marking pen or tape
■
ESD mat and grounding strap
■
Hydraulic or mechanical lift (optional for two-person installation)
■
In addition, you must provide a system console device, such as one of the following:
ASCII terminal
■
Workstation
■
Terminal server (optional to capture initial boot output)
■
Patch panel connected to a terminal server
■
Related Information
"Handling Precautions" on page 25
■
"ESD Precautions" on page 25
■
SPARC T7-4 Server Service Manual
■
26 SPARC T7-4 Server Installation Guide • March 2017
To protect electronic components from electrostatic damage, which can permanently