Triggeroverlap; Associated Genicam Register Information - IAI SP-20000M-CXP2 User Manual

7.3.5

Triggeroverlap

This function defines whether or not a trigger pulse can be accepted while data is being read out.
OFF： The trigger pulse is not accepted during CMOS readout.
Read Out： The trigger pulse can be accepted during CMOS readout.
7.3.6

Associated GenICam register information

Table – 38 Associated GenICam register information
GenICam Name
Trigger Selector
Trigger Mode
Trigger Software
Trigger Source
Trigger
Activation
Trigger Over Lap
SP-20000M-CXP2 / SP-20000C-CXP-2
Access
Acquisition Start
R/W Acquisition End
Frame Start
On
R/W
Off
W Command
Low
High
Soft
Frame Trigger Wait
Frame Active
Exposure Active
FVAL
R/W PG0 to PG3
User out0 to 3
TTL In1
Optp In
CXP In (Trigger Packet)
TTL In2
LVDS In1
Nand0 to 1
Rising Edge
Falling Edge
R/W
Level High
Level Low
Off
R/W
Read out
Values
- 45 -
Category
Acquisition Control
Acquisition Control
Acquisition Control
Acquisition Control
Acquisition Control
Acquisition Control