IAI SP-20000M-CXP2 User Manual page 37

SP-20000M-CXP2 / SP-20000C-CXP-2
ROI setting explanation if Multi ROI Index Max is set to 4
Index 1
Offset Y
Index 2
Offset Y
Index 3
Offset Y
Index 4
Offset Y
Video output of Multi ROI
Note:
If Multi ROI function is used, the frame grabber board that is used should be set as follows.
Horizontal pixel number is [Multi ROI Width]. Vertical pixel number is the aggregate of [Multi ROI
Height] as configured.
Index 4
Offset X
Index 2
Offset X
H-Binning Off
Width Max = 5120
[Width]＝
[Multi ROI Width]
]
Fig. 21 Multi ROI output image
- 35 -
Index 1
Offset X
Index 3
Offset X
[Height]=
[Index 1 Multi ROI Height]+
[Index 2 Multi ROI Height]+
[Index 3 Multi ROI Height]+
[Index 4 Multi ROI Height]
Index 1 Height
Index 2 Height
Index 3 Height
V-Binning Off
Height Max
= 3840
Index 4 Height