Configuring The Output Format - IAI GO-2400M-USB User Manual

Configuring the Output Format

Configure the size, position, and pixel format of the images to be acquired.
The factory settings are as follows. Change the settings as necessary.
Factory default values
Image Format Control
™ You can specify the image acquisition area. For details, see "ROI (Regional Scanning Function)" (page 34).
1
Select the [Feature Properties] tab, and select the item you want to configure under [Image
Format Control].
when a configurable item is selected.
Note
Settings can only be changed when image acquisition on the camera is stopped. If an item is grayed out and
does not appear even when you select it, click
2
Click and change the setting value.
Example: When changing [Width]
Item
Width
Height
Offset X (horizontal position)
Offset Y (vertical position)
Pixel Format
— 15 —
GO-2400M-USB / GO-2400C-USB
1936 (pixels)
1216 (pixels)
0 (pixels)
0 (pixels)
GO-2400M-USB: 8 Bit Monochrome
GO-2400C-USB: 8 Bit Bayer RG
(Stop Acquisition) to stop image acquisition.
Default value