Trigger Width Mode (Pwc) - IAI SP-20000M-CXP2 User Manual

7.6

Trigger width mode (PWC)

In this mode, the exposure time is equal to the trigger pulse width. Accordingly, longer exposure times
are supported. Additional settings determine if the trigger pulse can be accepted during the exposure
period.
Basic settings to use this mode
Trigger Mode = ON
Exposure Mode = Trigger Width
Table - 47 Typical Minimum trigger interval (Pixel Format : 8-bit)
Trigger Mode
Trigger Width
Exposure Mode
Note1： SP-20000M-CXP2 only
Note2： The above table is if Trigger Overlap is Readout.
SP-20000M-CXP2 / SP-20000C-CXP2
Readout Mode
Full
AOI Center 2/3
AOI Center 1/2
AOI Center 1/4
AOI Center 1/8
V Binning ON (Full)
(Note1)
Time (Min. Trigger Period)
CXP6_X1,
CXP6_X2
CXP3_X2
≧31.761 ms ≧63.200 ms
≧21.287 ms ≧42.252 ms
≧16.050 ms ≧31.777 ms
≧8.195 ms ≧16.066 ms
≧4.267 ms ≧8.211 ms
≧31.770 ms ≧63.216 ms
- 52 -
CXP3_X1
≧126.389 ms
≧84.492 ms
≧63.544 ms
≧32.121 ms
≧16.410 ms
≧126.423 ms