Gain Raw; Gain Auto; Tap Balance; Gain Auto Balance - IAI AM-200GE User Manual

11.3.5 Gain Raw

Each parameter can be adjusted in the following range.
AM-200GE:
AnalogAll
DigitalAll
Digital Tap2All
AB-200GE:
AnalogAll
DigitalAll
Digital Tap2All
Digital Red
Digital Blue
Digital Tap2Red ：-891～+1000/
Digital Tap2Blue ：-891～+1000

11.3.6 Gain Auto

This function works only in the FrameTrigger OFF and Pre-dump modes.
In JAI AGC Reference, the brightness level can be controlled.
In Gain Auto, there are three modes.
OFF :
Once :
Continuous : The gain auto control is always active.
The detailed settings are:
GainAuto speed
GainAuto Max
GainAuto Min
Gain Auto Reference
ALC Channel area

11.4. Tap Balance

The Tap control function adjusts automatically or
manually the OFFSET and the gain differences
between the left and right taps. The sensor
used in the AM-200GE and AB-200GE divides the
effective image area into 2 areas as shown in the
gain control or black control sections of this
manual.
The reference tap for all adjustments is Tap "1".

11.4.1 Gain Auto Balance

This feature selects the tap balance mode.
AM-200GE / AB-200GE
：-84 ～ 672 /
：-2393～+3379/
：-891～+1000
：0 ～ 672/
：-2393～+3379/
：-891～+1000/
：-4533～17713/
：-4533～17713/
Gain auto is disabled
The gain auto control is done only when it is enabled.
：Set the reaction speed of auto gain
：Set the maximum level of the gain auto control
：Set the minimum level of the gain auto control
：Set the target level of video.
For instance, set 100% of the video as the reference
video level
：Set the portion of the image to be used for gain
auto control
- 73 -
Tap 1 Tap 2