Typical Minimum Trigger Interval Of Sequence Roi Trigger - IAI SP-20000M-CXP2 User Manual

7.8.3

Typical minimum trigger interval of Sequence ROI Trigger

Table - 54 Typical Minimum trigger interval (Pixel Format: 8-bit)
Trigger Mode
Sequectial Timed
Exposure Mode
(Note1)
Note 1. Overlap mode=Readout is not available. Please set the exposure time not to be
Readout mode.
Note 2. SP-20000M-CXP2 only
Note 3. The minimum interval calculation assumes that the exposure time for all sequences are
equal. If there are differences, it is necessary to add the diference to the calculation.
If the exposure times are different, it is recommended to organize the exposure times
from the shortest exposure to the longest one in order to operate faster.
Note 4. The above interval is if the exposure time is set to 10 µs.
7.8.4 Defaul Sequence Index Table
Table – 55 Sequence Index table (Default)
Trigger Sequence
Width Height
Sequence
AOI Index
- Index 0 5120 3840
- Index 1 5120 3840
- Index 2 5120 3840
- Index 3 5120 3840
- Index 4 5120 3840
- Index 5 5120 3840
- Index 6 5120 3840
- Index 7 5120 3840
- Index 8 5120 3840
- Index 9 5120 3840
7.8.5 Sequence ROI setting parameters
Setting parameters for Sequence ROI are as follows.
(1) Sequence ROI Index Selector
In Sequence ROI Index Selector, Index 0 to 9 can be selected.
Sequence ROI – Width, Height, Offset X, Offset Y, Gain Selector - Gain/Red/Blue, Exposure
Time, Black Level, Binning Horizontal, Binning Vertical, LUT Enable, Frame Count, Next Index
for the selected index are displayed.
(2) Sequence ROI Width
Set the width of sequence ROI. The setting range is 8 to 5120 Pixels.
Rules for setting area and step number are the same as the normal ROI mode set by [Video
Send Mode] ="Normal".
(3) Sequence ROI Height
Set the height of sequence ROI. The setting range is 2 to 3840 lines.
Rules for setting area and step number are the same as the normal ROI mode set by [Video
Send Mode] ="Normal".
(4) Sequence ROI Offset X
SP-20000M-CXP2 / SP-20000C-CXP2
Readout Mode
Full
AOI Center 2/3
AOI Center 1/2
AOI Center 1/4
AOI Center 1/8
V Binning ON (Full)
(Note2)
Offset Gain Selector
Gain
X Y Red
(ALL)
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
0 0 100 0
Time (Min. Trigger Period)
CXP6_X2
≧31.761 ms
≧21.287 ms
≧16.050 ms
≧8.195 ms
≧4.267 ms
≧31.770 ms
Exposure Black
Time Level
Blue
0 180000 0
0 180000 0
0 180000 0
0 180000 0
0 180000 0
0 180000 0
0 180000 0
0 180000 0
0 180000 0
0 180000 0
- 62 -
CXP6_X1, CXP3_X1
CXP3_X2
≧63.200 ms ≧126.389 ms
≧42.252 ms ≧84.492 ms
≧31.777 ms ≧63.544 ms
≧16.066 ms ≧32.121 ms
≧8.211 ms ≧16.410 ms
≧63.216 ms ≧126.423 ms
Binning
LUT
Enable
Horizontal Vertical
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
1 (Off) 1 (Off) Off
Frame Next
Count Index
1 Index 0
1 Index 0
1 Index 0
1 Index 0
1 Index 0
1 Index 0
1 Index 0
1 Index 0
1 Index 0
1 Index 0