Correcting Density Manually; Adjusting Color Balance (Density) - Oki MC363 Advanced Manual

Correcting Density Manually

This machine automatically adjusts color registration when an image drum cartridge is
replaced or when 500 sheets are printed. You can manually adjust color registration from the
operator panel if necessary.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button to select [Print Setup] and press the
5
Press the button to select [Color Menu] and press the
6
Press the or button to select [Adjust Density] and press the
7
When [Execute] is displayed, press the
8
Check that [Yes] is selected on the confirmation screen, and press the
button.
Adjusting density starts.
button.
(OK) button.
button.
button.
button.
button.
(OK)
- 107 -

Adjusting Color Balance (Density)

When you adjust the shade to suit your preferences, operate from the operator panel.
To specify, darken or lighten pale part (Highlight), middle tone part (Mid-tone), and dark part
(Dark) of each color.
This section describes how to adjust for cyan. When adjusting other colors, perform the
same procedure to all colors and parts you want to adjust.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button to select [Print Setup] and press the
5
Press the button to select [Color Menu] and press the
6
Press the or button to select [Color Tuning/Print Pattern] and press the
button.
7
When [Execute] is displayed, press the
8
Check that [Yes] is selected on the confirmation screen, and press the
button.
The print pattern will be printed.
9
Press the or button to select [Cyan Tuning] and press the
10
Light cyan, intermediate cyan, dark cyan can be set. Press the
button to select the item you want to change and press the
11
Press the or button to enter the value you want to set and press the
(OK) button.
4. Print
button.
(OK) button.
button.
button.
button.
(OK)
button.
or
button.