Every 6 Months Maintenance; Gas Filter Replacement - 3D Systems ProX DMP 100 User Manual

EVERY 6 MONTHS MAINTENANCE

Gas filter replacement

The gas filter must be replaced every 6 months. The gas filter is located under the front doors.
Part required :
• Filter element : 1001884R00 .
1 . Make sure the gas and purge are not activated .
2 . Open the access door located below the front doors of the machine (1) .
3 . Remove the filter guard from the filter cap by unscrewing it (2).
4 . Remove the filter element. Dispose of it in accordance with all local/regional/national, state and federal regulations.
WARNING : FLAMMABLE POWDERS .
PLACE THE USED FILTER ELEMENT IN A CLOSED METALLIC CONTAINER IN A ROOM WITH FIRE DETECTION .
5 . Clean the filter guard with the use of a damp cotton cloth.
6 . Install the new filter element.
7 . Install the filter guard.
8 . Close the access door located below the main cabinet .
3D SYSTEMS, INC.
1
Filter cap
Filter guard
75
2
PN:80-D48 REV A