Table of Contents
Advertisement
SYSTEM USE
5
POWERING UP THE PRINTER
1 .
Make sure printer is plugged into the facility power .
2 .
Make sure that the 16A circuit-breaker is engaged upstream of the machine .
3 .
Turn on the main switch on the connection panel (1) .
4 .
Make sure that all doors are closed and emergency stop is not
pushed .
5 .
Switch the locking key to position "1", on the external control panel (2).
6 .
Open the compressed air valve (3) and gas valve (4) .
7 .
Start the machine by pressing the start push button, on the external control panel (5) .
PX Control
8 .
The
application will automatically start and be displayed on the screen control panel .
PX Control
To launch the
3D SYSTEMS, INC.
application manually, double-click on the icon
3
4
1
"PX_Control" from the desktop.
PX Control 2 .X .X .1
32
2
5
PN:80-D48 REV A
Advertisement
Table of Contents
