Table of Contents
Advertisement
13 . Clean the cover panel (inside and outside) with the use of damp cotton cloth to neutralize any presence of the
condensate (black particle aspect) .
14 . Clean the sides of the enclosure and protection bellow with the use of a damp cotton cloth to neutralize any presence
of the condensate (black particle aspect) .
15 . Remove any presence of powder on the enclosure and protection bellow with the use of a natural fiber brush and a
vacuum cleaner .
Caution: make sure not to damage the protection bellow during cleaning .
16 . Put back the cover panel and secure it by tightening the screws .
17 . Close the rear doors of the printer .
3D SYSTEMS, INC.
Metal particle
condensate
- Highly
combustible
73
PN:80-D48 REV A
Advertisement
Table of Contents
