Table of Contents
Advertisement
Machine Status menu
This menu displays a global view of the status of the
printer . It consists of 3 parts .
1
PREPARATION
Operations summary of machine preparation,
•
Green light = process complete
•
No light = process not complete
2
HARDWARE
Status of components (Green light = OK, Red light = fault)
Supply
•
: indicates the status of the compressed
air supply and gas supply,
•
Safety
: includes all the safety of the machine and interlocks states (open, locked) that can block a movement or a
manufacturing start,
•
Laser
: indicates the status of the laser (aiming, back reflection) and operating values (temperature, current and
power),
Laser head
•
: state of the thermo-couples, and the temperature values,
Axes
•
: indicates the state of the 4 motors, with the corresponding error code .
3
FILTERS TIMERS
This area indicates the operating time of the lens cleaner filter. This value must be reset during the process filter
replacement (see section "Step 7 : Lens cleaning" on page 38; optionally the reset button is also available in this menu) .
User level selection
User Level Selection
The
levels (except Operator level) are restricted by access code .
Icon
Operator level: first user level including a printer preparation wizard, showing the step-by-step
instructions on how to prepare/to start a job and to remove the built part when job complete .
Adjuster level: dedicated to advanced user - no printer preparation wizard . Access to the process
settings with read/write and read-only access (see appendix, reference 9000938N00) .
Maintainer level: dedicated to special servicing procedures . Access to Adjuster level menus (with
additional features and additional read/write access) + to the maintenance tool
Expert level: total access to the settings and to the Expert tool
Administrator level: reserved
3D SYSTEMS, INC.
gives access to other more advanced users and/or service tasks, grouped into 5 levels . All user
1
Description
45
2
3
PN:80-D48 REV A
Advertisement
Table of Contents
