Lifting - 3D Systems ProX DMP 100 User Manual

3d production printer

Hide thumbs Also See for ProX DMP 100:

Table of Contents

LIFTING

Caution: moving the printer may affect settings (alignments, calibration . . .) . Contact your 3D Systems-

certified Customer Support Engineer to check the operation of the printer after moving.

When moving the ProX

DMP100 system, follow the instructions outlined below :

•

The system must only be lifted by authorized people .

•

Make sure entire lifting, rigging and supporting structure has been inspected, and is in a good condition .

•

The main cabinet can be moved by using a forklift with a load capacity of at least 1500 kg (3307 lbs), with minimum fork

length of 1500 mm (59 .05 in .) .

3D SYSTEMS, INC.

PN:80-D48 REV A

Table of Contents