Safety Symbols And Definitions - 3D Systems ProX DMP 100 User Manual

SAFETY SYMBOLS AND DEFINITIONS

The following safety labels are posted at various points on the machine to indicate potentially hazardous conditions:
HOT SURFACES HAZARD: There are surfaces and materials in the vicinity that may be hot and could cause
severe burns .
LASER RADIATION HAZARD: Invisible laser radiation is accessible in the vicinity of this sign or behind the
access panel . Direct and scattered radiation can cause severe burns and blindness . Access panels are for
service only and should be opened only by certified service personnel.
ELECTRIC SHOCK HAZARD: High voltage electricity is accessible in the vicinity of this sign or behind the
access panel . High voltage can cause severe burns or death . Access panels are for service only and should
be opened only by certified service personnel or trained maintenance personnel.
CAUTION: Indicates something may happen that could cause loss of data, damage to equipment, or could
cause personal injury .
FIRE HAZARD: Indicates potential fire can occur that could cause damage to equipment or personal injury.
EXPLOSION HAZARD: Indicates potential explosion can occur due to combustible particles inside of unit
that could cause damage to equipment or personal injury .
PINCH POINT HAZARD: Keep hands clear .
STATIC HAZARD: Indicates electro-static discharge that can cause damage to the equipment or personal
injury
DUST HAZARD: Indicates dust particles are in the air and a suitable dust mask is required .
Disposable rubber gloves . Heat-resistant gloves such as welding gloves should be used in conjunction with
other fire-retardant clothing when there is a potential for fire, such as when performing a filter change in
the re-circulating unit .
Safety glasses and/or full face shield required .
Disposable dust mask rated FFP3 or N99 (or better) level protection required .
When working in areas where reactive metal condensates are present, use fire retardant special fabric,
rendered conductive, trousers without turn-ups and closed pockets .
Before starting any operation or maintenance on the printer, consult the Technical User Guide .
Antistatic shoes required .
Safety shoes required .
3D SYSTEMS, INC.
4
PN:80-D48 REV A