3D Systems ProX DMP 100 User Manual page 42

Step 7 : Lens cleaning
Caution: to ensure process quality, it is important to clean the lens before each job . Consult the section
"Cleaning the laser optic system" on page 52 for details on how to clean the lens .
If no filter replacement required
1 . Perform the actions (1) . Consult the section
"Cleaning the laser optic system" on page 52
for details on how to clean the lens .
2 . Click on Next (2) to go to the next step .
If filter replacement required
1 . When the lens cleaner timer
60 days, the interface will at first prompt to
change the lens cleaner filter. Perform the actions
(1) . Consult the Maintenance
on how to replace the filter.
3D SYSTEMS, INC.
value has reached
section for details
38
1
2
1
PN:80-D48 REV A