Preventive Maintenance Schedule; Every Month Maintenance - 3D Systems ProX DMP 100 User Manual

PREVENTIVE MAINTENANCE SCHEDULE

Maintenance not listed on this section is only allowed to be performed by 3D Systems-certified Customer Support Engineer.
ITEM
Air pressure
Pinch valve pressure
Gas pressure
Gas flow
Gloves
Front casings
Back casings
Exhaust filter
Gas filter
Calibration
3D Systems recommends having an additional annual printer service performed by 3D Systems-certified Customer Support
Engineer . Contact the 3DSystems hotline .

EVERY MONTH MAINTENANCE

The pressure and flowrate controls are performed below the front doors:
A
Compressed air pressure
B
Pinch valve pressure
C
Gas pressure
D
Gas flow
3D SYSTEMS, INC.
SPECIFICATION
Check : 5 .5 bar
Check : 3 .5<X<4 bar
Check : 2 bar
Check : 5<X<10 l/min
Check
Clean
Clean
Replace
Replace
Check
69
ONCE A EVERY 3
MONTH MONTHS
X
X
X
X
X
X
X
X
C
EVERY 6
EVERY YEAR
MONTHS
X
X
A D B
PN:80-D48 REV A