3D Systems ProX DMP 100 User Manual page 39

3d production printer

Hide thumbs Also See for ProX DMP 100:

Table of Contents

Step 1 : Initialization

For each new job preparation, the printer must be initialized at first. The

1 .

Click on the automatic cycle launch button (1) .

2 .

When automatic cycle completed, click on

Step 2 : Plate unloading

The

Plate unloading

step includes both automatic and manual actions . When automatic actions have been done, manual

actions are required .

1 .

Click on the

Start

button (1): this will launch the

automatic cycle .

2 .

When the automatic cycle is completed, then

perform the actions (2) by using the available

commands (3) and the external control panel .

Consult the section "Unloading a plate" on page

55 for details .

3 .

When manual actions completed, click on

to go to the next step .

3D SYSTEMS, INC.

(2) to go to the next step .

(4)

Initialization

step is performed automatically:

PN:80-D48 REV A

Table of Contents