Checking Attribute And Status (Pairvolchk) - Hitachi AMS 2000 Reference Manual

•
Table 1-9: Results of Pairmon Command Options
-D -nowait
-D
Invalid
Invalid
Invalid
Invalid -nowait
Invalid -nowait
Invalid -nowait
Invalid -nowait

Checking attribute and status (pairvolchk)

The pairvolchk command acquires and reports the attribute of a volume or
group connected to the local host (issuing the command) or remote host.
The volume attribute is SMPL (simplex), P-VOL (primary volume), or S-VOL
(secondary volume). The –s[s] option reports the pair status in addition to
the attribute.
parameters and returned values.
pairvolchk command and its output.
pairvolchk group status display.
•
Parameter
Command
Name
Format
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
-resevt -allsnd
When HORCM does not have an event, this option waits
until an event occurs. If one or more events exist, it
reports one event and resets the event which it
reported.
-allsnd When HORCM does not have an event, this option waits
until an event occurs. If one or more events exist, it
reports all events.
-resevt When HORCM does not have an event, this option waits
until an event occurs. If one or more events exist, it
reports one event and resets all events.
-resevt -allsnd When HORCM does not have an event, this option waits
until an event occurs. If one or more events exist, it
reports all events and resets all events.
When HORCM does not have an event, this option
reports event nothing. If one or more events exist, it
reports one event and resets the event which it
reported.
-allsnd When HORCM does not have an event, this option
reports event nothing. If one or more events exist, it
reports all events.
-resevt When HORCM does not have an event, this option
reports event nothing. If one or more events exist, it
reports one event and resets all events.
-resevt -allsnd When HORCM does not have an event, this option
reports event nothing. If one or more events exist, it
reports all events and resets all events.
Table 1-10 lists and describes the pairvolchk command
Table 1-10: Pairvolchk Command Parameters
pairvolchk
pairvolchk { -h  -q  -z  -I[H  M][instance#]  -g group  -d pair Vol 
-d[g] <raw_device> [MU#]  -FHORC  -FMRCF [MU#]  -d[g] <seq#>
<LDEV#> [MU#]  -c  -ss  -nomsg }
Performing CCI Operations
Actions
Figure 1-26 shows an example of the
Table 1-11 shows the truth table for
Value
1–31