Hitachi AMS 2000 Reference Manual page 199

Sense Detailed
code code
9612 0005
9613 0001
9613 0002
9613 0003
9613 0004
9613 0005
9613 0006
9618 0001
9618 0002
9618 0003
9618 0011
9618 0012
9618 0021
9618 0022
9618 0023
961C 0001
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
84 The P-VOL or S-VOL is being
formatted.
84 The S-VOL is in the S-VOL Disable
mode.
84 The P-VOL is in the S-VOL Disable
mode (at the time of a
restoration).
84 The S-VOL Disable is specified for
the P-VOL (at the time of a
restoration only).
84 The S-VOL Disable is specified for
the S-VOL.
84 Resynchronization is directed to
the ShadowImage pair whose S-
VOL is specified as S-VOL Disable.
84 The S-VOL Disable is specified for
the S-VOL (at the time of a
restoration only).
84 The P-VOL or S-VOL has not
undergone the forced restoration
by means of parity.
84 The P-VOL is undergoing the
forced restoration by means of
parity (at the time of a
restoration).
84 The S-VOL is undergoing the
forced restoration by means of
parity.
84 The P-VOL has not undergone the
forced restoration by means of
parity.
84 The P-VOL is undergoing the
forced restoration by means of
parity.
84 The P-VOL or data pool LU has not
undergone the forced restoration
by means of parity.
84 The P-VOL is undergoing the
forced restoration by means of
parity (at the time of a
restoration).
84 The data pool LU is undergoing the
forced restoration by means of
parity.
84 More LUs than supportable ones
were specified for LUNs of the P-
VOL.
Maintenance log and tracing functions
Recommended Action
Retry after the formatting is
completed.
Cancel the access attribute.
Cancel the access attribute.
Cancel the access attribute.
Cancel the access attribute.
Check the attribute of the LU.
Cancel the access attribute.
Retry after making the
restoration by means of
parity.
Retry after the restoration by
means of parity is completed.
Retry after making the
restoration by means of
parity.
Retry after making the
restoration by means of
parity.
Retry after the restoration by
means of parity is completed.
Retry after making the
restoration by means of
parity.
Retry after the restoration by
means of parity is completed.
Retry after the restoration by
means of parity is completed.
Make sure of the number of
the specified paired LU.
3–43