Hitachi AMS 2000 Reference Manual page 198

Sense Detailed
code code
9611 000A
9611 000B
9611 000C
9611 000D
9611 000E
9611 000F
9611 0010
9611 0013
9611 0014
9611 0015
9611 0016
9611 0017
9611 0018
9611 0019
9612 0001
9612 0002
9612 0003
9612 0004
3–42
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
84 The access attribute cannot be
changed because the Expiration
Lock is turned on.
84 The Retention Term is beyond the
limits of validity.
84 The S-VOL Disable was specified
for a ShadowImage S-VOL that is
in a status other than SMPL and
PSUS.
84 The S-VOL Disable was specified
for a TrueCopy S-VOL that is in a
status other than SMPL and PSUS.
84 The S-VOL Disable was specified
for a SnapShot V-VOL that is in a
status other than SMPL and PSUS.
84 Because the term of validity of the
temporary key was expired, the
setting of the access level that
turns on the Write Inhibit cannot
be made.
84 The target LU is defined as the
DM-LU.
84 The specified LU is an S-VOL of
TCE that status is other than SMPL
or PSUS.
84 The specified LU is an S-VOL of
Volume Migration.
84 The specified LU is the reserve LU. Check the status of the LU.
84 The data migration status is "data
is being copied", "data copy fails",
or "data copy is completed".
84 The data migration status is
"access path is being switched" or
"access path switching fails".
84 The specified LU cannot set the
Write prohibition attribute because
of S-VOL of PSUS(SP) of
ShadowImage.
84 The LU created in DP pool was
specified.
84 The P-VOL or S-VOL is being
formatted.
84 The P-VOL or S-VOL is being
formatted.
84 The P-VOL or S-VOL is being
formatted.
84 The P-VOL or S-VOL is being
formatted.
Maintenance log and tracing functions
Recommended Action
–
Check that the specified
value that has been set is 0 to
21900.
Check the pair attribute of
the LU.
Check the pair attribute of
the LU.
Check the pair attribute of
the LU.
Check the term of validity of
the license key, or use the
Data Retention function with
the permanent key.
Check the attribute of the LU.
Check the attribute of the LU.
Check the status of the LU.
Check the data migration
status.
Check the data migration
status.
Check the status of the LU.
Specify an LU other than the
LU created in DP pool.
Retry after the formatting is
completed.
Retry after the formatting is
completed.
Retry after the formatting is
completed.
Retry after the formatting is
completed.