•
# ls /dev/sd* | ./inqraid –CLI
DEVICE_FILE
sdh
sdi
sdj
The output of the inqraid command with –CLI includes:
•
DEVICE_FILE: Shows only the device file name.
•
PORT: Shows the port name of the array.
•
SERIAL: Shows the product number of the array.
•
LDEV: Shows the volume management number in the array. LDEV
indicates LU.
•
H/M/12: Shows the volume attribute (P-VOL is indicated as P,
S-VOL is indicated as S, and SMPL is indicated as s).
•
SSID: Shows the array ID where LDEV is allocated. LDEV indicates LU.
•
R:Group: Shows the position of the physical CCI group mapped in
LDEV. LDEV indicates LU.
•
PRODUCT_ID: Shows the product ID in the standard inquiry page.
1018
•
C:\HORCM\etc>echo hd01 hd03 | inqraid –CLIWP
DEVICE_FILE
Harddisk1
Harddisk3
Figure 1-75: Inqraid Command -CLIWP Option Example (Windows)
The output of the inqraid command with –CLIWP includes:
•
DEVICE_FILE: Shows only the device file name.
•
WWN (PWWN or NWWN): For fibre channel, if –CLIWP option is
specified, this option shows the Port_WWN of the host adaptor for the
specified device. If –CLIWN option is specified, this option shows the
Node_WWN of the host adaptor.
For iSCSI, "0000000000000000" will be always displayed.
•
AL and LUN: Shows a hyphen (-) all the time.
•
PORT: Shows the port name of the array.
•
SERIAL: Shows the product number of the array.
•
LDEV: Shows the volume management number in the array. LDEV
indicates LU.
•
PRODUCT_ID: Shows the product ID in the standard inquiry page.
1–90
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
PORT
SERIAL
CL2-B
85003005
CL2-B
85003005
-
-
Figure 1-74: Inqraid Command -CLI Option (Linux)
- CL2-A
-
85006145
PWWN
AL PORT
500060e802f01018
500060e802f0
Performing CCI Operations
LDEV
H/M/12
SSID R:Group PRODUCT_ID
23
-/P/--
0004 5:02-00
14
-
-
-
-
-
12 DF600F
LUN
SERIAL
- CL2-A
-
85006145
DF600F
-
DF600F-CM
-
-
LDEV PRODUCT_ID
11 DF600F