Hitachi AMS 2000 Reference Manual page 220

Sense Detailed
code code
9629 0010
9629 0011
9629 0012
9629 0013
9629 0014
9629 0015
9629 0016
9629 0017
9629 0018
9629 0019
9629 001A
9629 001B
9629 001C
9629 001D
9629 001E
9629 001F
9629 0020
9629 0021
9629 0022
9629 0023
9629 0024
9629 0025
3–64
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
84 The specified S-VOL has created a
TCE pair.
84 The P-VOL is a Cache Residency LU
or has been set to the reserved
Cache Residency LU.
84 The S-VOL is a Cache Residency
LU or has been set to the reserved
Cache Residency LU.
84 The specified P-VOL has created a
SnapShot pair.
84 The specified S-VOL has created a
SnapShot pair.
84 The specified P-VOL is the pool LU. Check the status of the LU.
84 The specified S-VOL is the pool LU. Check the status of the LU.
84 The specified P-VOL is being quick
formatted.
84 The specified S-VOL is being quick
formatted.
84 The specified P-VOL is the DM-LU. Check the status of the LU.
84 The specified S-VOL is the DM-LU. Check the status of the LU.
84 The DM-LU is not set.
84 The specified P-VOL has unwritten
data.
84 The pair cannot be allocated the
differential bit map.
84 The specified P-VOL is a SubLU of
a unified LU.
84 The specified S-VOL is a SubLU of
a unified LU.
84 The size of the specified P-VOL and
the S-VOL are not the same.
84 The DIRs in charge of the specified
P-VOL and the S-VOL are not the
same.
84 The LUNs of the specified P-VOL
and S-VOL are the same.
84 There exist maximum number of
pairs already (included
ShadowImage pairs).
84 The specified P-VOL is the LU, for
which a change of the cache
partitions had been reserved.
84 The specified S-VOL is the LU, for
which a change of the cache
partitions had been reserved.
Maintenance log and tracing functions
Recommended Action
Check the pair status of the
LU.
Check the status of the LU.
Check the status of the LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Retry after the quick
formatting is completed.
Retry after the quick
formatting is completed.
Retry after setting the DM-
LU.
Check the status of the LU.
Split the unnecessary pairs.
Check the status of the LU.
Check the status of the LU.
Specify an LU that the same
size.
Specify an LU that belongs to
the same DIR.
Check the specified LUN.
Split the unnecessary pairs.
Retry after releasing the
reserved status.
Retry after releasing the
reserved status.