Hitachi AMS 2000 Reference Manual page 57

# pairdisplay -g vg01 -fe
Group PairVol(L/R) .... P-LDEV# M CTG JID AP EM E-Seq# E-LDEV# R/W
vg01 oradb1(L)
vg01 oradb1(R)
Figure 1-31: Pairdisplay Command -fe Option (TrueCopy)
# pairdisplay -g vg01 -fe
Group PairVol(L/R) .... P-LDEV# M CTG JID AP EM E-Seq# E-LDEV# R/W
vg01 oradb1(L)
vg01 oradb1(R)
The output of the pairdisplay command includes:
• CTG: Shows the CTG ID.
• JID: Shows "-".
• AP: Shows the number of active link paths of TrueCopy or TCE on the
P-VOL.
• CM: Shows copy mode:
- N: Non-snap shot volume (ShadowImage)
- S: Snap shot volume (SnapShot)
• EM, E-Seq#, E-LDEV#: Shows "-".
the –v smk option of the pairdisplay command.
• R/W:?Shows "-".
•
# pairdisplay –g vg01 –v smk
Group PairVol(L/R)
vg01 oradb1(L) 85000004
vg01 oradb1(R)
Figure 1-33: Pairdisplay Command -v smk Option (SnapShot)
The output of the pairdisplay command includes:
• UTC-TIME: The UTC when the Split-Marker was added to the V-VOL is
displayed.
• Split-Marker: The Split-Marker added to the V-VOL is displayed. When
the pair concerned is the SnapShot pair that was split by the pairsplit
–ms command, the Split-Marker is displayed as information on the V-
VOL.
Figure 1-34
command.
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
.... 1
.... 1
.... 1 - 1
.... 1 - 1
Figure 1-32: Pairdisplay Command -fe Option (TCE)
Serial# LDEV# P/S Status UTC-TIME -----Split-Marker-----
5 P-VOL PSUS
85000004 6 S-VOL SSUS
shows examples of the –v pid option of the pairdisplay
Performing CCI Operations
- - - 2 - -
- - - 2 - -
- 2 - - - -/-
- 2 - - - -/-
Figure 1-33 shows examples of
- 
-
123456ef QS_Check_12345678
- -/-
- -/-
1–39