Raidqry Command - Hitachi AMS 2000 Reference Manual

•
The output of the raidar command includes:
• TIME [ ]: Shows the interval time.
• PORT: Shows the port name of the array.
• T: Shows the port ID.
• L: Shows the LU number in the target ID of the array.
• VOL: Shows the volume attribute (P-VOL, S-VOL, SMPL).
• STATUS: Shows the pair status of the paired volume.
• IOPS: Shows the number of I/Os (read/write) per second (total I/O
rate).
• HIT(%): Shows the hit rate for read I/Os (read hit rate).
• W(%): Shows the ratio of write I/Os to total I/Os (percent writes).
• IOCNT: Shows the number of times of write and read.

Raidqry command

The raidqry command (RAID query) displays the configuration of the
connected host and array.
command parameters.
command output.
•
Parameter
Command
Name
Format
1–58
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Figure 1-45: Raidar Command Example
Table 1-20
Figure 1-46
Table 1-20: Raidqry Command Parameters
raidqry
raidqry { -h  -q  -z  -I[H  M][instance#]  -l  -r group  [ -f ] | -g }
Performing CCI Operations
lists and describes the raidqry
shows an example of the raidqry
Value